Your Cart

Granville Exhaust Assembly Paste 500g

Granville Exhaust Assembly Paste 500g
Granville Exhaust Assembly Paste 500g
Ex VAT: £2.63
  • Stock: 21
  • SKU: 100255
  • EAN: 5020618004349
  • MPN: 0434

Granville Exhaust Assembly Paste is a high quality adhesive/sealant for sealing exhaust systems during assembly. Granville Exhaust Assembly Paste is supplied as a read to use thixotropic paste which exhibits excellent early grab and rapid bond strength development. After thermosetting the product forms a permanent seal which gives excellent adhesion in service.

Product Benefits:

  • Ready to use and easy to apply soft paste
  • Eases assembly by lubricating joints
  • High bond strength - removes the need to weld joints
  • Fast setting - air cures to a hard finish especially when heated
  • Designed to withstand temperatures > 1200°C
  • Seals all joints in exhaust system
  • Slump resistant
  • Asbestos free
  • VOC free
  • Shock and vibration resistant during service
  • Allows easy dismantling of the exhaust for future maintenance

Product Usage:
All surfaces must be clean and sound, free from dirt, grease and other contamination that can prevent full bond strength being achieved. Use mechanical abrasion to clean porous surfaces before application. Surfaces may be slightly damp but not running wet. Apply Exhaust Assembly Paste to the prepared surfaces evenly ensuring good contact and assemble the joint. Joint clamps should be fitted immediately as heat from the exhaust will rapidly harden the paste. Tools and excess uncured material may be cleaned with water.

Storage Instructions: Store between 5°C - 25°C and avoid extremes of temperature.

Shelf Life: 12 months from date of manufacture.

Appearance: Grey paste
Odour: Characteristic
Specific Gravity: 1.7 - 1.85
Solubility: Soluble in water when uncured

Brand Granville
Size 500g
Type Exhaust assembly paste

Write a review

Note: HTML is not translated!
Bad Good