This Bond It Patioseal is a premium grade, solvent-free solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages and dirt and grime build-up. For enhancing the present colour and greatly extending the lifespan of block paving driveways or paths ..
This Bond It Silicone Ultra Waterseal is used as a masonry waterproofer suitable for use on brick, stone, concrete and unglazed tiles which, while repelling exterior water, allows the emission of water vapour ensuring the interiors and cavity walls remain dry. It protects the surface against water a..
This is a chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increase their resistance to freeze-thaw cycles. Eliminates the need for additional lime to be added to the mix. Reduces the risk of crackin..
This Bond It Integral Water Resistant Plasticiser is a high strength cement waterproofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists w..
This Bond It SBR Admixture is a styrene butadiene copolymer latex, which increases flexibility of cement screeds and mortars and improves water and chemical resistance and durability. Suitable for internal and external floors and rendering in areas of continual or intermittent water and chemical con..
This Bond It Brick and Patio cleaner will remove cement and mortar splashes, grime, oil, grease and other difficult-to-remove stains, from brickwork, patios, garages, paving, concrete floors and warehouses.
Apply by brush and allow to stand for 10-15 minutes – do not allow to dry out..
This Stabilizing Solution is a white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating. Suitable for interior and exterior use and can be applied to damp surfaces. Stabilises poor surfaces, seals and binds chalky or weathered areas, gives a sound ..
This Bond It A70 studlock is resistant to fuels, oils, hydraulic and refrigeration fluids. Also acts as a lubricant during assembly to ensure accurate torquing and protection against corrosion. Prevents rusting or corrosion and cannot be dismantled once adhesive has set.
This Bond It threadlock is used as a locking compound for direct application to lightly oiled components. Replaces spring washers and lock nuts. Allows for disassembly using the correct tools. Also prevents rusting or corrosion. Non-drip consistency for clean, economic application.
This is a crease resistant, lead coloured, self-adhesive flashing tape for general repairs and sealing. Designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. It is also ideal for sealing around RSJ's, flues, concrete columns, roof-lights, guttering and extractor ven..
Bond It range of easy-to-use, chloride-free permanent cement colourant dye. Manufactured with the best quality oxide pigments for permanently colouring all types of mortars cement, concrete and renderings. Easy dispersion of pigment into the mix allows for uniform shades per batch, colour can be adj..
Bond It PU18 is a one-part, moisture curing, polyurethane adhesive and sealant, with a shore A hardness of 40, for the construction and transport industries. Produces tough, elastic seals and joints with excellent adhesion characteristics which helps dampen vibration. Also oil resistant making it id..
Bond It WALLPAPER ADHESIVE, when mixed with water, provides an all-purpose paste suitable for hanging all common wallcoverings including lining paper, blown, sculptured, woodchip, textured vinyl, washable and heavy embossed. It can also be used for fixing polystyrene tiles and as a primer for new pl..
This Bond It Aluminium Foil tape is a self-adhesive, heat and light reflective tape suitable for use with duct systems on all types of ventilation and air conditioning systems.
Benefits: Consistent performance over a wide service temperature range High tack self adhesive bright foil tape High sta..
Bond It Wood Pro is a permanently flexible, one part, ready to use, moisture cure, internal wood flooring adhesive supplied in a plastic cartridge. Free from silicone, solvent, isocyanates and water. Based on hybrid polymer technology; Wood Pro reduces the risk of warping or deforming the wood floor..
Bond It Gripbond is a totally unique “hybrid" sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength.
- For interior and exterior applications in all weather conditions.
- Remains permanently flexible. Can be over-painted with water-based..
Bond It PVCU vleaner effectively removes ingrained dirt and restores surface colour without leaving a residue. NOTE: For wood grain PVC finishes use Bond It Foil Safe Solvent Cleaner.
DO NOT SMOKE WHILST USING THIS PRODUCT! Use heavy gloves to protect hands from solvent. Soak a clean a..
Bond It PVCU cleaner is an effective solvent-free cleaner for uPVC frames, cladding and trims. Also suitable for use around the house, ideal for cleaning taps, trims, plastic or enamel baths and tiles. Removes dirt and stains and can be buffed to give a deep sheen finish. Non-corrosive.
Bond It glass cleaner is a fast-acting, high quality cleaner with a non-smear formula. Excellent for cleaning windows and mirrors. Trigger spray for easy application on 1L bottle.
Adjust spray nozzle to give required spray pattern. Spray from 200mm (8"), a light application of cleaner...
Glue Monster The Beast from Bond It is one-part moisture cure polyurethane adhesives specially formulated for waterproof bonding. These products are seawater proof and are resistant to acid and chemicals. For internal and external use. A solvent-free, rapid setting, brown, liquid PU adhesive with an..
This Bond It Superglue is rapid curing adhesive specially formulated to give good adhesion to most rubbers and plastics. Good humidity resistance of cured adhesive. Excellent adhesion to EPDM & SBR rubbers.
Supplied in a handy self merchandising display box.
For assembly of ru..
This Bond It Superglue is high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu. For use on porous surfaces. Also has gap-filling properties making it ideal for bonding trims and caps on PVCu windows as well as rubber, wood, metal, ceramics, MDF, leather, por..
Bond It Duo 2 in 1 D3 is a fast drying, water-resistant, PVA wood adhesive with a bond strength stronger than the wood itself. For use as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive.
Conforms to the requirement..
Bond It Contractors PVA is an all purpose, contractors grade primer, sealer and bonding agent that dries quickly to give a high bond strength. Perfect choice for construction jobs.
Conforms to BS 5270.
Can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as ..
Anchor Bond Resin Adhesive from Bond It is a 2-part system applied in one single action to produce a cost-effective, tough chemical resistant fixing. Ideal day to day applications include: railings, steel structures, satellite dishes, fire surrounds, gates, sanitary fixings/towel holders, pipes and ..
Bond It Gripbond is a fast bonding, non-slumping, instant grab adhesive with good gap-filling properties even on uneven surfaces. Can replace mechanical fixings in a wide variety of applications. Can be used in all weather conditions and is suitable for rough and porous surfaces. It can also be over..
Bond It PU5 wood glue gel is one-part moisture cure polyurethane adhesives specially formulated for waterproof bonding. These products are seawater proof and are resistant to acid and chemicals. For internal and external use.
- Gel formulation: A solvent-free, rapid setting, thixotrophic, transluce..
Bond It PU30 is one-part moisture cure polyurethane wood adhesives specially formulated for waterproof bonding. These products are seawater proof and are resistant to acid and chemicals. For internal and external use.
- Liquid formulation: A solvent-free, rapid setting, brown, liquid PU adhesive wh..
This foam gun cleaner from Bond It is a dual purpose, solvent-based solution for effective cleaning of expanding foam applicator guns and removal of wet/uncured foam. Regular cleaning is essential in order to prolong the service life of the applicator and optimise foam delivery. Attaches to standard..
This Bond It PU foam is based on a moisture curing polyurethane pre-polymer. Quick, economic and easy to apply. Improves draught and heat insulation, fills irregular gaps, fixes framework and deadens sound. Can be cut, sawn, plastered and sealed over once cured. Available in 500ml and 750ml aerosol ..